My technical requirements depend on the venue and performance environment. I work especially well in warehouses and factory spaces because they have good natural acoustics. However, I can also perform in theaters, on stages, outdoors, and in many other environments. Please let me know about your venue, such as: 1. audience capacity2. stage size 3. acoustics 4. whether I can tap dance directly on the floor 5.floor construction 6. floor material Then I can tell you exactly what equipment I will need. Floor The floor requirements depend on the venue. If the floor has a good sound, I can tap dance directly on it. If the floor does not have enough resonance, I will need a wooden platform or wooden boards for tap dancing. The minimum size is 3 ft × 6 ft × 1 in (about 90 × 180 × 2.5 cm). It is also fine to use two 3 ft × 3 ft boards. Wooden pallets or strong wooden boxes can also work, depending on the setup. Table I would like to borrow one table from the venue for my metal percussion instruments. The ideal size is:Height: about 50 in (127 cm) Width: about 50 in (127 cm) Depth: about 25 in (64 cm) These measurements are flexible. Microphones Depending on the venue, I may be able to perform completely acoustically without microphones. If microphones are needed, I would like to borrow: 3 × Shure SM58 2 × Shure Beta 91A If this setup is not available, the following is also okay: 2 × SM58 (or similar) 1 × Beta 91A (or similar) I will also bring my own piezo microphones.

Technical Requirements

濤踏 とうとう　Toh Tou板橋文夫(piano)・瀬尾高志(contrabass)とのトリオ。

PHOTO